PART 29—AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT
- § 29.1 Applicability
- § 29.2 Special retroactive requirements
- § 29.21 Proof of compliance
- § 29.25 Weight limits
- § 29.27 Center of gravity limits
- § 29.29 Empty weight and corresponding center of gravity
- § 29.31 Removable ballast
- § 29.33 Main rotor speed and pitch limits
- § 29.45 General
- § 29.49 Performance at minimum operating speed
- § 29.51 Takeoff data: general
- § 29.53 Takeoff: Category A
- § 29.55 Takeoff decision point (TDP): Category A
- § 29.59 Takeoff path: Category A
- § 29.60 Elevated heliport takeoff path: Category A
- § 29.61 Takeoff distance: Category A
- § 29.62 Rejected takeoff: Category A
- § 29.63 Takeoff: Category B
- § 29.64 Climb: General
- § 29.65 Climb: All engines operating
- § 29.67 Climb: One engine inoperative (OEI)
- § 29.71 Helicopter angle of glide: Category B
- § 29.75 Landing: General
- § 29.77 Landing Decision Point (LDP): Category A
- § 29.79 Landing: Category A
- § 29.81 Landing distance: Category A
- § 29.83 Landing: Category B
- § 29.85 Balked landing: Category A
- § 29.87 Height-velocity envelope
- § 29.141 General
- § 29.143 Controllability and maneuverability
- § 29.151 Flight controls
- § 29.161 Trim control
- § 29.171 Stability: general
- § 29.173 Static longitudinal stability
- § 29.175 Demonstration of static longitudinal stability
- § 29.177 Static directional stability
- § 29.181 Dynamic stability: Category A rotorcraft
- § 29.231 General
- § 29.235 Taxiing condition
- § 29.239 Spray characteristics
- § 29.241 Ground resonance
- § 29.251 Vibration
- § 29.301 Loads
- § 29.303 Factor of safety
- § 29.305 Strength and deformation
- § 29.307 Proof of structure
- § 29.309 Design limitations
- § 29.321 General
- § 29.337 Limit maneuvering load factor
- § 29.339 Resultant limit maneuvering loads
- § 29.341 Gust loads
- § 29.351 Yawing conditions
- § 29.361 Engine torque
- § 29.391 General
- § 29.395 Control system
- § 29.397 Limit pilot forces and torques
- § 29.399 Dual control system
- § 29.411 Ground clearance: tail rotor guard
- § 29.427 Unsymmetrical loads
- § 29.471 General
- § 29.473 Ground loading conditions and assumptions
- § 29.475 Tires and shock absorbers
- § 29.477 Landing gear arrangement
- § 29.479 Level landing conditions
- § 29.481 Tail-down landing conditions
- § 29.483 One-wheel landing conditions
- § 29.485 Lateral drift landing conditions
- § 29.493 Braked roll conditions
- § 29.497 Ground loading conditions: landing gear with tail wheels
- § 29.501 Ground loading conditions: landing gear with skids
- § 29.505 Ski landing conditions
- § 29.511 Ground load: unsymmetrical loads on multiple-wheel units
- § 29.519 Hull type rotorcraft: Water-based and amphibian
- § 29.521 Float landing conditions
- § 29.547 Main and tail rotor structure
- § 29.549 Fuselage and rotor pylon structures
- § 29.551 Auxiliary lifting surfaces
- § 29.561 General
- § 29.562 Emergency landing dynamic conditions
- § 29.563 Structural ditching provisions
- § 29.571 Fatigue Tolerance Evaluation of Metallic Structure
- § 29.573 Damage Tolerance and Fatigue Evaluation of Composite Rotorcraft Structures
- § 29.601 Design
- § 29.602 Critical parts
- § 29.603 Materials
- § 29.605 Fabrication methods
- § 29.607 Fasteners
- § 29.609 Protection of structure
- § 29.610 Lightning and static electricity protection
- § 29.611 Inspection provisions
- § 29.613 Material strength properties and design values
- § 29.619 Special factors
- § 29.621 Casting factors
- § 29.623 Bearing factors
- § 29.625 Fitting factors
- § 29.629 Flutter and divergence
- § 29.631 Bird strike
- § 29.653 Pressure venting and drainage of rotor blades
- § 29.659 Mass balance
- § 29.661 Rotor blade clearance
- § 29.663 Ground resonance prevention means
- § 29.671 General
- § 29.672 Stability augmentation, automatic, and power-operated systems
- § 29.673 Primary flight controls
- § 29.674 Interconnected controls
- § 29.675 Stops
- § 29.679 Control system locks
- § 29.681 Limit load static tests
- § 29.683 Operation tests
- § 29.685 Control system details
- § 29.687 Spring devices
- § 29.691 Autorotation control mechanism
- § 29.695 Power boost and power-operated control system
- § 29.723 Shock absorption tests
- § 29.725 Limit drop test
- § 29.727 Reserve energy absorption drop test
- § 29.729 Retracting mechanism
- § 29.731 Wheels
- § 29.733 Tires
- § 29.735 Brakes
- § 29.737 Skis
- § 29.751 Main float buoyancy
- § 29.753 Main float design
- § 29.755 Hull buoyancy
- § 29.757 Hull and auxiliary float strength
- § 29.771 Pilot compartment
- § 29.773 Pilot compartment view
- § 29.775 Windshields and windows
- § 29.777 Cockpit controls
- § 29.779 Motion and effect of cockpit controls
- § 29.783 Doors
- § 29.785 Seats, berths, litters, safety belts, and harnesses
- § 29.787 Cargo and baggage compartments
- § 29.801 Ditching
- § 29.803 Emergency evacuation
- § 29.805 Flight crew emergency exits
- § 29.807 Passenger emergency exits
- § 29.809 Emergency exit arrangement
- § 29.811 Emergency exit marking
- § 29.812 Emergency lighting
- § 29.813 Emergency exit access
- § 29.815 Main aisle width
- § 29.831 Ventilation
- § 29.833 Heaters
- § 29.851 Fire extinguishers
- § 29.853 Compartment interiors
- § 29.855 Cargo and baggage compartments
- § 29.859 Combustion heater fire protection
- § 29.861 Fire protection of structure, controls, and other parts
- § 29.863 Flammable fluid fire protection
- § 29.865 External loads
- § 29.871 Leveling marks
- § 29.873 Ballast provisions
- § 29.901 Installation
- § 29.903 Engines
- § 29.907 Engine vibration
- § 29.908 Cooling fans
- § 29.917 Design
- § 29.921 Rotor brake
- § 29.923 Rotor drive system and control mechanism tests
- § 29.927 Additional tests
- § 29.931 Shafting critical speed
- § 29.935 Shafting joints
- § 29.939 Turbine engine operating characteristics
- § 29.951 General
- § 29.952 Fuel system crash resistance
- § 29.953 Fuel system independence
- § 29.954 Fuel system lightning protection
- § 29.955 Fuel flow
- § 29.957 Flow between interconnected tanks
- § 29.959 Unusable fuel supply
- § 29.961 Fuel system hot weather operation
- § 29.963 Fuel tanks: general
- § 29.965 Fuel tank tests
- § 29.967 Fuel tank installation
- § 29.969 Fuel tank expansion space
- § 29.971 Fuel tank sump
- § 29.973 Fuel tank filler connection
- § 29.975 Fuel tank vents and carburetor vapor vents
- § 29.977 Fuel tank outlet
- § 29.979 Pressure refueling and fueling provisions below fuel level
- § 29.991 Fuel pumps
- § 29.993 Fuel system lines and fittings
- § 29.995 Fuel valves
- § 29.997 Fuel strainer or filter
- § 29.999 Fuel system drains
- § 29.1001 Fuel jettisoning
- § 29.1011 Engines: general
- § 29.1013 Oil tanks
- § 29.1015 Oil tank tests
- § 29.1017 Oil lines and fittings
- § 29.1019 Oil strainer or filter
- § 29.1021 Oil system drains
- § 29.1023 Oil radiators
- § 29.1025 Oil valves
- § 29.1027 Transmission and gearboxes: general
- § 29.1041 General
- § 29.1043 Cooling tests
- § 29.1045 Climb cooling test procedures
- § 29.1047 Takeoff cooling test procedures
- § 29.1049 Hovering cooling test procedures
- § 29.1091 Air induction
- § 29.1093 Induction system icing protection
- § 29.1101 Carburetor air preheater design
- § 29.1103 Induction systems ducts and air duct systems
- § 29.1105 Induction system screens
- § 29.1107 Inter-coolers and after-coolers
- § 29.1109 Carburetor air cooling
- § 29.1121 General
- § 29.1123 Exhaust piping
- § 29.1125 Exhaust heat exchangers
- § 29.1141 Powerplant controls: general
- § 29.1142 Auxiliary power unit controls
- § 29.1143 Engine controls
- § 29.1145 Ignition switches
- § 29.1147 Mixture controls
- § 29.1151 Rotor brake controls
- § 29.1157 Carburetor air temperature controls
- § 29.1159 Supercharger controls
- § 29.1163 Powerplant accessories
- § 29.1165 Engine ignition systems
- § 29.1181 Designated fire zones: regions included
- § 29.1183 Lines, fittings, and components
- § 29.1185 Flammable fluids
- § 29.1187 Drainage and ventilation of fire zones
- § 29.1189 Shutoff means
- § 29.1191 Firewalls
- § 29.1193 Cowling and engine compartment covering
- § 29.1194 Other surfaces
- § 29.1195 Fire extinguishing systems
- § 29.1197 Fire extinguishing agents
- § 29.1199 Extinguishing agent containers
- § 29.1201 Fire extinguishing system materials
- § 29.1203 Fire detector systems
- § 29.1301 Function and installation
- § 29.1303 Flight and navigation instruments
- § 29.1305 Powerplant instruments
- § 29.1307 Miscellaneous equipment
- § 29.1309 Equipment, systems, and installations
- § 29.1316 Electrical and electronic system lightning protection
- § 29.1317 High-intensity Radiated Fields (HIRF) Protection
- § 29.1321 Arrangement and visibility
- § 29.1322 Warning, caution, and advisory lights
- § 29.1323 Airspeed indicating system
- § 29.1325 Static pressure and pressure altimeter systems
- § 29.1327 Magnetic direction indicator
- § 29.1329 Automatic pilot system
- § 29.1331 Instruments using a power supply
- § 29.1333 Instrument systems
- § 29.1335 Flight director systems
- § 29.1337 Powerplant instruments
- § 29.1351 General
- § 29.1353 Electrical equipment and installations
- § 29.1355 Distribution system
- § 29.1357 Circuit protective devices
- § 29.1359 Electrical system fire and smoke protection
- § 29.1363 Electrical system tests
- § 29.1381 Instrument lights
- § 29.1383 Landing lights
- § 29.1385 Position light system installation
- § 29.1387 Position light system dihedral angles
- § 29.1389 Position light distribution and intensities
- § 29.1391 Minimum intensities in the horizontal plane of forward and rear position lights
- § 29.1393 Minimum intensities in any vertical plane of forward and rear position lights
- § 29.1395 Maximum intensities in overlapping beams of forward and rear position lights
- § 29.1397 Color specifications
- § 29.1399 Riding light
- § 29.1401 Anticollision light system
- § 29.1411 General
- § 29.1413 Safety belts: passenger warning device
- § 29.1415 Ditching equipment
- § 29.1419 Ice protection
- § 29.1431 Electronic equipment
- § 29.1433 Vacuum systems
- § 29.1435 Hydraulic systems
- § 29.1439 Protective breathing equipment
- § 29.1457 Cockpit voice recorders
- § 29.1459 Flight data recorders
- § 29.1461 Equipment containing high energy rotors
- § 29.1501 General
- § 29.1503 Airspeed limitations: general
- § 29.1505 Never-exceed speed
- § 29.1509 Rotor speed
- § 29.1517 Limiting height-speed envelope
- § 29.1519 Weight and center of gravity
- § 29.1521 Powerplant limitations
- § 29.1522 Auxiliary power unit limitations
- § 29.1523 Minimum flight crew
- § 29.1525 Kinds of operations
- § 29.1527 Maximum operating altitude
- § 29.1529 Instructions for Continued Airworthiness
- § 29.1541 General
- § 29.1543 Instrument markings: general
- § 29.1545 Airspeed indicator
- § 29.1547 Magnetic direction indicator
- § 29.1549 Powerplant instruments
- § 29.1551 Oil quantity indicator
- § 29.1553 Fuel quantity indicator
- § 29.1555 Control markings
- § 29.1557 Miscellaneous markings and placards
- § 29.1559 Limitations placard
- § 29.1561 Safety equipment
- § 29.1565 Tail rotor
- § 29.1581 General
- § 29.1583 Operating limitations
- § 29.1585 Operating procedures
- § 29.1587 Performance information
- § 29.1589 Loading information
- Appendix A to Part 29—Instructions for Continued Airworthiness
- Appendix B to Part 29—Airworthiness Criteria for Helicopter Instrument Flight
- Appendix C to Part 29—Icing Certification
- Appendix D to Part 29—Criteria for Demonstration of Emergency Evacuation Procedures Under § 29.803
- Appendix E to Part 29—HIRF Environments and Equipment HIRF Test Levels