§ 91.1703
Compliance and eligibility.
(a) Except as provided in paragraph (b) of this section, no person may manipulate the controls, act as PIC, act as second-in-command, or provide pilot training for a Mitsubishi MU-2B series airplane unless that person meets the requirements of this subpart.
(b) A person who does not meet the requirements of this subpart may manipulate the controls of a Mitsubishi MU-2B series airplane if a pilot in command who meets the requirements of this subpart is occupying a pilot station, no passengers or cargo are carried on board the airplane, and the flight is being conducted for one of the following reasons—
(1) The pilot in command is providing pilot training to the manipulator of the controls;
(2) The pilot in command is conducting a maintenance test flight with a second pilot or certificated mechanic; or
(3) The pilot in command is conducting simulated instrument flight and is using a safety pilot other than the pilot in command who manipulates the controls for the purposes of § 91.109(b).
(c) A person is required to complete Initial/transition training if that person has fewer than—
(1) 50 hours of documented flight time manipulating the controls while serving as pilot in command of a Mitsubishi MU-2B series airplane in the preceding 24 months; or
(2) 500 hours of documented flight time manipulating the controls while serving as pilot in command of a Mitsubishi MU-2B series airplane.
(d) A person is eligible to receive Requalification training in lieu of Initial/transition training if that person has at least—
(1) 50 hours of documented flight time manipulating the controls while serving as pilot in command of a Mitsubishi MU-2B series airplane in the preceding 24 months; or
(2) 500 hours of documented flight time manipulating the controls while serving as pilot in command of a Mitsubishi MU-2B series airplane.
(e) A person is required to complete Recurrent training within the preceding 12 months. Successful completion of Initial/transition or Requalification training within the preceding 12 months satisfies the requirement of Recurrent training. A person must successfully complete Initial/transition training or Requalification training before being eligible to receive Recurrent training.
(f) Successful completion of Initial/transition training or Requalification training is a one-time requirement. A person may elect to retake Initial/transition training or Requalification training in lieu of Recurrent training.
(g) A person is required to complete Differences training in accordance with an FAA approved MU-2B training program if that person operates more than one MU-2B model as specified in § 91.1707(c).