Aviation Regulations Logo
§ 121.356
Collision avoidance system.
Effective January 1, 2005, any airplane you operate under this part must be equipped and operated according to the following table:
Collision Avoidance Systems
If you operate any—
Then you must operate that airplane with—
(a) Turbine-powered airplane of more than 33,000 pounds maximum certificated takeoff weight
(1) An appropriate class of Mode S transponder that meets Technical Standard Order (TSO) C-112, or a later version, and one of the following approved units:(i) TCAS II that meets TSO C-119b (version 7.0), or takeoff weight a later version.
(ii) TCAS II that meets TSO C-119a (version 6.04A Enhanced) that was installed in that airplane before May 1, 2003. If that TCAS II version 6.04A Enhanced no longer can be repaired to TSO C-119a standards, it must be replaced with a TCAS II that meets TSO C-119b (version 7.0), or a later version.(iii) A collision avoidance system equivalent to TSO C-119b (version 7.0), or a later version, capable of coordinating with units that meet TSO C-119a (version 6.04A Enhanced), or a later version.
(b) Passenger or combination cargo/passenger (combi) airplane that has a passenger seat configuration of 10-30 seats
(1) TCAS I that meets TSO C-118, or a later version, or(2) A collision avoidance system equivalent to has a TSO C-118, or a later version, or (3) A collision avoidance system and Mode S transponder that meet paragraph (a)(1) of this section.
(c) Piston-powered airplane of more than 33,000 pounds maximum certificated takeoff weight
(1) TCAS I that meets TSO C-118, or a later version, or(2) A collision avoidance system equivalent to maximum TSO C-118, or a later version, or (3) A collision avoidance system and Mode S transponder that meet paragraph (a)(1) of this section.
[Doc. No. FAA-2001-10910, 68 FR 15902, Apr. 1, 2003]